|
My main project that I purchased it for was a rather complicated loudspeaker design involving lots of templates, MDF, solid cherry, veneer, etc. Another feature that I think is really cool is the built-in dust extraction system on the plunge base. The soft-start feature is really nice because there is really no kick back, despite such a powerful motor. This was very effective in eliminating most of the dust, although it required frequent cleaning of the ShopVac filter. Combined with good bits, the PC has produced wonderful results. I have used both bases and I'm impressed by how smoothly and quickly the bases can be switched out. I purchased the Porter-Cable 893PK package here on Amazon.Com and couldn't be happier. Then, I read the manual and discovered how to use the dust extractor with my ShopVac.
Overall, I think this is a very capable router package and one that will likely serve me for years of wooodworking projects. While cutting down a bunch of MDF using a template, I noted a huge amount of fine dust produced by the router. Yes, this is a bit more expensive than other offerings, but the feeling of quality was evident the first time I opened up the package. I also used the unit for trimmning veneer edges with excellent and precise results. I can say that my expectations have been greatly exceeded. MDF dust is probably the worst for clogging ShopVac filters.
The clear base makes template work go very smoothly. Recently, I used the router to trim sheathing on a shed project and was amazed at how quickly this unit and a 1/2 x 3" straight cutting bit could trim the edges on 8' ply and OSB panels, giving perfect edges on the shed cladding. A true dust collection system would help here. I think the extra expense is well worth it.
It carries away most of the dust and stops debris from being thrown up and out at you. The soft start and variable speed are nice upgrades to the older P/C and the additional Hp is nice too. Great product for both the router table & hand work. Keep up the great work P/C.Advice to others who had problems: 1) Read the owners manual. This is a powerful tool that does develop heat. if you enclose it in a table and don't provide adequate ventilation for it to keep cool, it will burn up.The new dust extraction system (optional) for the fixed base is impressive. 2) Keep the machine cool if enclosed in a table. 3) Don't buy cheap bits that break and fall into the housing.TA
Router does it's job. Plunger had to be sent into the manufacturer upon receiving it for repair. It wouldn't slide or lock lock.
I really love having this dual purpose. I have the fixed base mounted in router table. It is very simple to remove motor and place in plunge base when I need to use it outside of the router table.
My only concern/gripe is with the rubber sleeve on the plunge base. I was not planning on purchasing a PC router b/c many of them do not have the spindle lock. The dust collection was amazing, probably sucking away 95% of the chips. I purchased this router for the intial job of routing a juice line on a maple cutting board. If I can solve the sleeve problem this becomes a 5 star rating. The bit changing is easy with the spindle lock mechanism.
The power is ample and it starts and stops very smoothly.
While changing the plastic converter to connect my duct collection hose, the sleeve dropped down which if left in that position would allow dust to get into the mechanism.
I don't spend hours everyday in my shop but I like to purchase top of the line tools, and this falls into that category, so when I am working on a project, I get good results.
It worked like a champ.
I stumbled upon this particular PC model and ordered it right away.
I do plan to contact PC and see what they recommend.
I was able to slide it back in place but am not convinced that it won't be a continuous issue.
Overall I am very satisfied.
I hope PC can help me fix it.
|
